Log Commands; Status And Control Commands; Table 2-4 Alom Log Commands; Table 2-5 Alom Status And Control Commands - Sun Microsystems Netra T2000 Administration Manual

Log Commands

The ALOM log commands display the console output and ALOM event buffers.
ALOM Log Commands
TABLE 2-4
Command
consolehistory [-b
lines|-e lines] [-g lines]
[-v] [boot|run]
showlogs [-b lines|-e
lines] [-g lines] [-v]

Status and Control Commands

The ALOM status and control commands enable you to perform typically manual
tasks with the server, remotely.
ALOM Status and Control Commands
TABLE 2-5
Command
bootmode [skip_diag |
diag | reset_nvram |
normal | bootscript=
"string"]
break [-y] [-c]
clearasrdb
clearfault UUID
console [-f]
disablecomponent asrkey
enablecomponent asrkey
flashupdate [-s IPaddr -f
pathname] [-v]
18 Netra T2000 Server Administration Guide • September 2006
Summary
Displays the host server console output
buffers. The -v option displays the entire
contents of the specified log.
Displays the history of all events logged in
the ALOM event buffer.
Summary
Controls the host server boot method through
the OpenBoot PROM firmware.
Drops the host server from the system into
OpenBoot PROM or kadb.
Removes all entries from the asr-db
blacklist.
Manually clears host-detected faults. UUID is
the unique fault ID of the fault to be cleared.
Connects to the host system console. The -f
option forces the console write lock from one
user to another.
Adds a component to the asr-db blacklist,
where asrkey is the component to disable.
Removes a component from the asr-db
blacklist, where asrkey is the component to
enable.
Updates the ALOM firmware. This command
downloads main and bootmon firmware
images to ALOM.
Example
sc> consolehistory boot -b 10
sc> showlogs -b 100
Example
sc> bootmode reset_nvram
sc> reset
sc> break
sc> clearasrdb
sc> clearfault 1234
sc> console
sc> disablecomponent
MB/CMP0/CH3/R1/D1
sc> enablecomponent
MB/CMP0/CH3/R1/D1
sc> flashupdate -s 1.2.3.4 -f
/usr/platform/SUNW,Netra210/li
b/images/alommainfw