First Seize The Line, Then Dial; Dial First, Then Seize The Line - Siemens HiPath500 User Manual

Step by step
c or d When the handset is idle: Press and hold down the Talk
Feature not availab-
le.
Please replace hand-
set.
o
and if necessary
S
Press for five seconds Insert a dial pause. A "P" appears between the digits en-
c or d Press the Talk key or Speakerphone key within 30 sec-
Language
If your preferred language for the display texts is not
set, you can set this yourself (

First seize the line, then dial

key or press the Speakerphone key.
o
Enter the required phone number. The user will be
called.
Typing errors cannot be corrected. If you make a typing
error, press the On-hook key.
either:
p
The user answers. Conduct the call.
or:
The user is busy or rejects the call. You are routed to the
other party's mailbox (if configured) or can program a
callback request
a Press the On-hook key briefly.

Dial first, then seize the line

Dialling preparation:
X
Enter the required phone no. and correct individual char-
acters as necessary using the "Delete" Display key.
tered. You may have to insert a pause, forexample, be-
tween the prefix and the phone number or when check-
ing a mailbox.
Note:
The dialling preparation function is also available
with number redial and when dialling from the
handset's phonebook (Ó).
Dialling:
onds. The user will be called.
Conducting calls – the basic functions
Page 20).
Page 5.
3