Disabling/Enabling Automatic Call Waiting; Override - Siemens HiPath500 User Manual

Step by step
> <
Service?
> <
Call wait. term. off?
> <
Service?
> <
Call wait. term. on?

Override

Disabling/enabling automatic call
waiting
You can disable/ enable automatic call waiting signalling
for a second call during a telephone conversation.
Disabling the call waiting tone
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
a Press the On-hook key to end the operation.
Enabling the call waiting tone
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
a Press the On-hook key to end the operation.
Override
You need to speak to an internal user urgently, even
though his line is busy. The "Override" function allows
you to interrupt the ongoing call to pass on a message.
This function is only available when the code has been
input and if it has been configured by the service engi-
neer.
p
The user is busy.
* 6 2 Call the function.
o
Enter the phone number of the busy user.
Conducting calls – with multiple users
75