Mcu Services - TANDBERG 800 User Manual

MCU services

A Multipoint Control Unit (MCU) enables several sites to participate in the same conference.
An MCU conference can have different modes:
Voice Switched means that the image of the person currently speaking will be broadcast to all the other
conference participants. This will remain the case until another participant starts to speak.
Continuous Presence shows several participants on the same screen at the same time.
Chairman Control functionality enables one participant to control the meeting by selecting which of the
conference participants is to be broadcast to the other participants.
T
NOTE HIS SYSTEM HAS AS AN OPTIONAL BUILT
M S
ULTI ITE SUPPORTS BOTH
The system can also control external MCUs in a very flexible manner using the functions described below.
D MCU
TIP
URING AN CONFERENCE
'U ', 'MCU S
TILITIES TATUS
TANDBERG Videoconferencing System
- MCU, M S
IN ULTI ITE
V S C
OICE WITCHED AND ONTINUOUS
,
A STATUS LINE WILL PROVIDE INFORMATION ABOUT THE CONFERENCE
L : O '.
INE FF
, 3
WHICH SUPPORTS UP TO VIDEO CALLS
P ,
RESENCE MODE SEE SECTION
51
Advanced use
(4 )
SITES AND ONE TELEPHONE CALL
'M S '.
ULTI ITE
. T
O REMOVE THIS STATUS LINE
. T
HE
,
SELECT