TANDBERG 800 User Manual page 36

General use
End a Duo Video call
disconnect To end a Duo Video call, press D
connection or the whole connection.
Controlling camera, changing video source, presets in a Duo Video call
The main monitor will always display incoming video. The 2nd monitor will display outgoing video (Duo Video in full
screen / Main connection in PIP).
Pressing S will toggle Duo Video full screen / Main source in PIP and vice versa. Pressing S
ELFVIEW
not change anything on the main monitor.
Pressing M PIP will move PIP only on the 2nd monitor.
OVE
Controlling the camera, changing video source, using presets will affect the video source currently displayed in full
screen mode.
E I D V
XAMPLE F UO IDEO IS SHOWN IN FULL SCREEN ON THE
V . I
IDEO SOURCE F THE MAIN CONNECTION IS SHOWN IN FULL SCREEN
.
CONNECTION SOURCE
If both connections are selected to display the same video source, Duo Video will be closed.
TANDBERG Videoconferencing System
. Select if you want to disconnect only the Duo Video
ISCONNECT
2 ,
ND MONITOR PRESSING ANY OF THE VIDEO SOURCE BUTTONS WILL CHANGE
,
PRESSING ANY OF THE VIDEO SOURCE BUTTONS WILL CHANGE THE MAIN
36
will
ELFVIEW
D
UO