Multisite (Mcu) - TANDBERG Videoconferencing System Short User Manual

General use

MultiSite (MCU)*

The system has a built-in multipoint conference unit (MCU), MultiSite, which has the capability to establish
meetings with up to 4 video sites (5 if at least one site is a telephone call, ISDN/analogue/mobile). The video calls
in a conference must be connected using the same bandwidth. It is possible to have telephone meetings with up
to 5 participants. A conference can consist of any combination of ISDN/LAN sites.
Adding an extra site - dial out
First establish a normal point-to-point call.
• Press C to bring up the following menu:
ONNECT
• Press 'Add Site' to bring up the MultiSite dial menu.
• Enter the number to call.
connect
• Press C
ONNECT
Establishing MultiSite meetings using Directory
It is possible to pre-define meetings using Directory. All sites will then be connected automatically instead of
having to add one by one site.
• Press D .
IRECTORY
• Highlight a MultiSite entry and press C
See 'Directory' section for further information.
* - Optional feature.
TANDBERG Videoconferencing System
.
ONNECT
10