Initializing The Ice Terminal - Infinity ICE4000 Hardware And Installation Manual

Chapter 2

Initializing the ICE Terminal

After the terminal receives a new program load, an initialization is required to start the terminal
operations. In other cases, when options are changed, such as a new card type, an initialization is
required to update the terminal parameters. An initialization takes approximately 30 seconds to
complete.
During an initialization, the terminal automatically connects to the initialization host to receive the
downloading of the initialization parameters, known as the terminal profile.
Step-by-Step
To initialize an ICE terminals:
Step Action
Touch Menu on the terminal.
1
N : The Idle prompt may vary depending on the terminal and
OTE
its configuration.
Touch Terminal on the terminal display.
2
Touch Initialize on the terminal display.
3
4 Touch Yes on the terminal display to confirm. The terminal
begins dialing the host.
The terminal loads the initialization parameters. This process
takes 25 seconds.
The initialization is complete.
2-12 ICE 4000 Hardware and Installation Manual
Terminal response
MAIN
New Trans
Reports Terminal
Server
Setup
Browser Functions
Supervisor
TERMINAL
Initialize Prog Load
Shift
Train Mode
ICE-PAC NMS Call
StatCall Deployment
Lock
INITIALIZE
Correct?
No Yes
COMMS
DIALING NOW
COMMS
PROCESSING NOW
COMPLETE
Transaction complete
Continue
940265-001, rev. D
X
Batch
Tab
Tests
Ì
X
View
Logon
Reset
X