Loading Paper Into The Ice 4000; Figure 2-6. Loading The Paper Roll; Figure 2-7. Loading The Paper Roll - Infinity ICE4000 Hardware And Installation Manual

Loading Paper into the ICE 4000

The ICE 4000 uses a thermal paper roll for receipt printing.
Step-by-Step
To load paper into the ICE 4000:
N :
The software application must be loaded into the terminal before proceeding.
OTE
1. After powering up the terminal as shown in Powering Up the Terminal, slide the cover lock,
located on the back of the terminal, to the right and remove the paper cover.
2. Place the ICE 4000 on its face.
3. Place the paper roll in the bucket so the paper feeds from under the roll, not over the top,
and has a straight-line path into the printer paper-feed mechanism.
4. Feed the end of the paper under the paper guide in a straight path until the paper feeds
automatically.
5. Replace the printer paper cover and slide the cover lock to the left.
940265-001, rev. D

Figure 2-6. Loading the paper roll

Paper roll
Printer guide

Figure 2-7. Loading the paper roll

Hypercom Corporation
Installation Procedures
2-5