Chapter 2 Installation Procedures; Installing The Battery Pack; Figure 2-3. Installing The Ice 4000 Battery Pack - Infinity ICE4000 Hardware And Installation Manual

C H A P T E R
Installation Procedures
This chapter describes how to install the ICE 4000 terminal. The available ports on the ICE 4000
are described and identified for you, along with instructions for operating the ICE 4000 terminal.

Installing the Battery Pack

The ICE 4000 uses a Lithium Ion battery. The ICE 4000 has built-in circuit protection and battery
charger. If using the ICE 4000 as a mobile unit, plug the terminal in and let it charge for up to six
hours. Use the following procedures to access the battery pack.
Step-by-Step
To access the battery pack on the ICE 4000 terminal:
1. Remove the battery cover by placing your finger in the battery access panel groove. Press in
and lift the panel away from the ICE 4000.
2. Insert the battery with the label-side up, and be sure that the three metal connectors are
facing the front of the terminal.
2

Figure 2-3. Installing the ICE 4000 Battery Pack