Ice 4000 Hardware Features - Infinity ICE4000 Hardware And Installation Manual

Terminal Information

ICE 4000 Hardware Features

The following is a list of the ports and features of the ICE 4000 terminal:
Comm Port
The comm port allows the ICE 4000 terminal to communicate with external devices such as an
ECR (electronic cash register), OCR (optical character reader) wand, bar code reader, check
reader, or an external PIN pad through an RS232 or RS485 connection.
Power Port
The power port supports two types of Hypercom power adapters. The Linear power adapter is
used within the United States of America. The Switcher power adapter is used internationally.
Contrast Control Dial
Rotating the Contrast Control Dial, located on the left side of the terminal, changes the contrast
of the display screen.
Terminal Modem
The optional internal modem, the Hypercom FastPOS™ 9600, is compatible with the Bell 212A
modem and the CCITT V.22 interface and provides for Asynchronous or Synchronous operation
at 9600 bps. The optional modem is suitable for both dial and leased-line operation.
Terminal Radio
The ICE 4000 supports four radio types: CDPD (cellular digital packet data), Mobitex (Cingular),
GSM, and the 900 MHz.
Terminal Power Adaptors
Hypercom offers two types of terminal power adaptors. The Linear power adaptor is used within
the United Stated of America. The Switcher power adaptor is used internationally.
940265-001, rev. D Hypercom Corporation 1-3