Self-Test And Diagnostics - Infinity ICE4000 Hardware And Installation Manual

Chapter 2

Self-Test and Diagnostics

Following a successful power connection, a double beep indicates the terminal automatically
initiated its self diagnostic routine. The self-test lasts approximately four seconds.
If the terminal is not loaded with software, the displays shown in the following table are typical.
Description
SMIBOOTXXX: Boot program name
XXX: Boot program release
The memory page status indicates that no
program is loaded.
PE indicates Program Error. In this case, the
program is not loaded.
2-8
Table 2-1. Self-test and diagnostics when software is not loaded
ICE 4000 Hardware and Installation Manual
Terminal response
SMIBOOTXXX
WAIT-SELF TEST
MEMORY PAGE STATUS:
BOOT: XXXX
01: FFFFFFFFFFFFFFF
17: FFFFFFFFFFFFFF
Restart
Merchant Program
Program Load
Clear Page Memory
Maintenance Funcs
Fast Load
940265-001, rev. D