Connecting The Telephone Line - Infinity ICE4000 Hardware And Installation Manual

Chapter 2

Connecting the Telephone Line

If your ICE 4000 has a dial modem, use the following procedure to connect the telephone line.
Step-by-Step
To connect the phone line:
1. Insert one end of the telephone cable shipped with the ICE 4000 terminal into a dedicated
analog modular telephone receptacle.
2. Insert the other end of the telephone cable into the opening marked LINE on the back panel
of the ICE 4000 terminal. The use of a different telephone cable might result in improper
operation. Ensure that the telephone line cable latches are firmly locked into the jacks on
both the ICE 4000 terminal and the wall receptacle.
N :
If a dial tone is not heard, check the cable connection. Connecting another telephone set into
OTE
the wall jack helps determine whether the telephone line is working. Hypercom recommends
that the terminal uses a dedicated telephone line. Hypercom terminals do not function using
digital phone lines, for example, PBX lines.
2-6 ICE 4000 Hardware and Installation Manual 940265-001, rev. D