Using The Stylus; Figure 2-4. The Ice 4000 Stylus - Infinity ICE4000 Hardware And Installation Manual

Installation Procedures

Using the Stylus

The Hypercom ICE 4000 terminal is operated by using the provided stylus. You must use the
provided stylus; use of any other item may damage the touch-screen and void the manufacturer
warranty. The stylus is located on the right side on the terminal, below the power button, and is
stored in a built-in sheath.
Step-by-Step
To remove the stylus:
1. Place your finger on the raised grip of the stylus.
2. Push it up and away from the terminal to remove.
N :
When the stylus is not in use, return it to the sheath.
OTE

Figure 2-4. The ICE 4000 Stylus

940265-001, rev. D Hypercom Corporation 2-3