Ordering Information; Specifications - Delta A Series Instruction Sheet

Ordering Information

Series
Panel Size
(W × H)
Output Selection
Communication
(Optional)
Current Transformer
(CT) Function
(Optional)
Display, LED & Pushbuttons
• : Function key.
1. Press this key to select the desired function mode.
2. Press this key to confirm a setting value.
• : Mode key. Press this key to set parameters within each function mode.
o o
• C, F : Temperature unit LEDs.
• ALM1 / ALM2 : Alarm output LED. The ALM1 / ALM2 LED lights when Alarm 1 or Alarm 2 output is ON.
• : Up key. Press this key to increase values displayed on the SV display. Hold down this key to speed up the incremental action.
• : Down key. Press this key to decrease values displayed on the SV display. Hold down this key to speed up the decrements.

Specifications

Input voltage
Operation voltage range
Power consumption
Display method
Sensor type
Control mode
Control output
Display accuracy
Sampling rate
Vibration resistance
Shock resistance
Ambient temperature
DTA: Delta A Series Temperature Controller
4848: 1/16 DIN W48 × H48mm
4896: 1/8 DIN W48 × H96mm
7272: W72 × H72mm
R: Relay output, SPDT (SPST: 1/16 DIN size), 250VAC, 5A
V: Voltage Pulse output, 14V+10% ~ -20% (Max. 40mA)
C: Current output, 4 ~ 20mA
0: No interface
1: RS-485
None: No CT function (Current transformer is not provided)
T: Current transformer is provided (only DTA7272 series support this function)
• PV Display: to display the process value or parameter type.
• SV Display: to display set point, parameter operation read value, manipulated
variable or set value of the parameter.
AT: flashes when the Auto-tuning operation is ON.
•
• OUT: lights when the output is ON.
o
C LED lights when this parameter is configured for Celsius and
100 ~ 240VAC 50/60Hz
85% to 110% of rated voltage
5VA max.
7-segment digit LED Display
Process value (PV): Red color, Set point (SV): Green color
Thermocouple: K, J, T, E, N, R, S, B, U, L, Txk
3-wire Platinum RTD: Pt100, JPt100
Copper resistor: Cu50
PID, ON/OFF control or Manual tuning
Relay output:(resistive load): SPDT (SPST: 1/16 DIN size), 250VAC, 5A
Voltage Pulse output: DC 14V, Max. load current 40mA
Current output: 4 to 20mADC (Load resistance: Max. 600Ω)
0.1% of measuring range
500 msec/per scan
2
10 to 55Hz, 10m/s for 10min, each in X, Y and Z directions
2
Max. 300m/ s , 3 times in each 3 axes, 6 directions
o o
0 C ~ +50 C
9648: 1/8 DIN W96 x H48
9696: 1/4 DIN W96 × H96mm
- 2 -
o
F LED lights if configured for Fahrenheit.