Portion To Which Locktite Is Applied - JUKI DNU-1541 Engineer's Manual

5. PORTION TO WHICH LOCKTITE IS APPLIED

LOCKTITE has been applied to the following parts at the time of assembly at the factory.
Avoid disassembling these parts to the most. When an assembly which includes the aforementioned parts
has been forced to be disassembled, be sure to wash the LOCKTITE applied part using a paint thinner or
the like, and reassemble it using LOCKTITE after removing any moisture from the mating faces.
If it is hard to remove a part which has been fixed using LOCKTITE, heat it using a torch lamp or the like to
help remove the part.
No. Portion to which LOCKTITE is applied
1 Feed adjusting rod hinge screw
2 Vertical change base arm pin
3 Alternate dial shaft bushing
4 Cylinder connecting screw hinge screw
5 Alternate vertical change base support shaft setscrew
6 Guide roller shaft
7 Rotary knife base connecting link hinge screw
8 Knife driving shaft connecting link hinge screw
9 Cam follower shaft
10 Cam roller shaft
11 Thread release bar
Feed adjusting rod
No.1
Fedd adjusting
base
LOCKTITE applied
Feed adjusting rod
hinge screw
No.4
LOCKTITE applied
Cylinder connecting
screw hinge screw
Knife driving shaft
No.7
front arm
Rotary knife base
Rotary knife base
connecting link
LOCKTITE applied
Rotary knife base connecting
link hinge screw
No.10
Cam roller
Cam roller shaft
Cam follower
LOCKTITE applied
Vertical change
No.2
base arm pin
No.5
C y l i n d e r
connecting
screw
Setscrew
No.8
Knife driving shaft
connecting link
Knife driving
shaft
connecting
link hinge
screw
LOCKTITE applied
No.11
Thread release bar
LOCKTITE applied
Part No.
SD0800402TP
10715308
10715100
SD0720331SP
SS8150710SP
D2423245E00
SD0500301SP
SD0600403TP
D2434141E00A
D2444141E00
21441209
No.3
LOCKTITE
applied
Vertical adjusting
arm
Top cover B
No.6
LOCKTITE
applied
Vertical change base
support shaft
No.9
Knife driving
shaft rear arm
Cam driving
base
Cam follower
shaft nut
Cam driving base
Cam follower
Cam follower spring
Thread release bar coupling
Thread release bar coupling nut
42
LOCKTITE No.
LOCKTITE #638
LOCKTITE #638
LOCKTITE #638
LOCKTITE #243
LOCKTITE #243
LOCKTITE #638
LOCKTITE #243
LOCKTITE #243
LOCKTITE #243
LOCKTITE #638
LOCKTITE #243
Alternate dial shaft bushing
LOCKTITE
applied
Guide roller
LOCKTITE applied
Guide roller shaft
Solenoid arm
LOCKTITE
applied
Cam follower shaft