Dip Switch Settings For Pool Or Spa Only - Jandy AquaLink RS Installation Manual

Page 8
7.3 DIP Switch Settings for
DIP Switch #
1
2

4
5
6

8
Pool or Spa Only
OFF
AUX1= any equipment
AUX2= any equipment
AUX= any equipment
Heater cool down operates.
Normal operation
Spare
Spare
After thermostat setting has been reached,
heater will remain OFF for  minutes.
ON
AUX1= Pool Cleaner
AUX2= Low Speed for a two-speed filter
pump.
Filter pump circuit becomes High Speed.
No change
Heater cool down disabled.
Factory adjustment- when this switch is on,
temperature delays are eliminated and solar
temperature is displayed.
Do not leave this switch in the ON
position.
No change
No change
After thermostat setting has been reached,
heater will remain OFF for 5 minutes.