Manual Configuration; Dynamic (Cable) - D-Link EBR-2310 User Manual

Section 3 - Configuration
My Internet
Select Dynamic IP (DHCP) to obtain IP Address information
Connection:
automatically from your ISP. Select this option if your ISP does not
give you any IP numbers to use. This option is commonly used for
Cable modem services.
Host Name:
The Host Name is optional but may be required by some ISPs.
Use Unicasting:
Check the box if you are having problems obtaining an IP address
from your ISP.
DNS Addresses:
Enter the Primary DNS server IP address assigned by your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP. 1500 is the default
MTU.
MAC Address:
The default MAC Address is set to the Internet port's physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless
required by your ISP. You can use the Clone Your PC's MAC
Address button to replace the Internet port's MAC address with
the MAC address of your Ethernet card.
D-Link EBR-2310 User Manual

Manual Configuration

Dynamic (Cable)

20