Massage Function - Mercedes-Benz COMAND Operating Instructions Manual

Seat functions
50
i
For SL-Class vehicles with dynamic
multicontour seats: when driving dynamics
are activated due to a change of direction
(e.g. cornering), the backrest side cushion
settings can temporarily not be used.
Adjusting the seat side bolsters
This function is only available on SL-Class
vehicles with multicontour seats or dynamic
multicontour seats.
This function allows you to adjust the air
cushions in the seat side bolsters.
Select the seat (
X
Y
Select Seat Sides Seat Sides
X
COMAND controller and press W to
confirm.
A scale appears.
Turn cVd or slide ZVÆ the COMAND
X
controller and press W to confirm.
To exit the menu: press the % back
X
button.
Balance
This function is available on SL-Class
vehicles.
page 48).
by turning cVd the
The Balance function controls the distribution
of heat on the seat backrest and cushion.
The Balance function influences the currently
set heating level of the seat heating; see the
separate vehicle Operator's Manual.
Select the seat ( page 48).
X
Y
Select Balance Balance by turning cVd the
X
COMAND controller and press W to
confirm.
A scale appears and shows the current
setting. Positive values indicate the heat
output for the seat backrest, negative
values indicate the heat output for the seat
cushion. The intensity is indicated by an
orange bar in the stylized seat above the
scale.
The values stand for:
0 0 - backrest and seat cushion are heated
R
equally to the maximum level
1 1 to 3 3 - the heat output to the seat
R
cushion is reduced in one-third
increments
-1 -1 to -3 -3 - the heat output to the backrest
R
is reduced in one-third increments
Turn cVd or slide XVY the COMAND
X
controller and press W to confirm.
To exit the menu: press the % back
X
button.

Massage function

This function is available on M-Class and GL-
Class vehicles with multicontour seats and on
SL-Class vehicles with dynamic multicontour
seats.