Presentation - Mercedes-Benz COMAND Operating Instructions Manual

In the example, the Now turn right Now turn right
announcement is made 150 ft. before the
change of direction.
The display is split into two halves, as in the
announcement phase.
Once the change of direction is completed,
COMAND automatically switches back to full-
screen display.
Example of a display without changes
of direction
Route (highlighted in blue)
:
Current vehicle position
;
Current road
=
Map orientation selected
?
Map scale selected
A
Lane recommendations
Example: lane recommendations
Point of the next change of direction
:
Point of the change of direction after next
;
Next change of direction (in this case, turn
=
off to the right)
Route guidance
Graphic representation of the distance to
?
the next change of direction
Distance to the next change of direction
A
Possible lane (light blue)
B
Recommended lane (dark blue)
C
Lane not recommended (gray)
D
Current vehicle position: the tip of the
E
triangle indicates the vehicle's direction
of travel
On multi-lane roads, COMAND can display
lane recommendations for the next change of
direction. The corresponding data must be
available in the digital map.
COMAND displays lane recommendation C,
based on the next two changes of direction.
The number of lanes applies to the point at
which the next change of direction is
required.
i
The multifunction display also shows lane
recommendations.
Only the recommended lanes are displayed
here, see the separate vehicle Operator's
Manual.
83
Z