Reset Function - Mercedes-Benz COMAND Operating Instructions Manual

Importing/exporting data
Insert the SD memory card (
X
or
Connect a USB device (e.g. a USB memory
X
stick) ( page 197).
Y
Press W.
X
The system menu appears.
Select Settings Settings by turning cVd the
X
COMAND controller and press W to con-
firm.
Select Import/Export Data Import/Export
X
to confirm.
Select Import Data Import Data
X
press W to confirm.
page 196).
Y
Data and press W
or Export Data Export Data and
If PIN protection is activated, a PIN prompt
appears when you select
Enter the PIN, select¬and press W to
X
confirm.
You can now proceed in the same way as if
PIN protection was deactivated.
To select a preset: select
X
USB Storage USB Storage and press W to confirm.
Select All Data All Data and press W to confirm.
X
This function exports all the data to the
selected disc.
or
Select the data type and press W to con-
X
firm.
Depending on the previous entry, select the
data type for the export O or not ª.
Select Cont. Cont. and press W to confirm.
X
i
Personal music files in the MUSIC REGIS-
TER cannot be saved and imported again
using this function.

Reset function

You can completely reset COMAND to the
factory settings. Amongst other things, this
will delete all personal COMAND data. This
includes the station presets, entries in the
destination memory and in the list of previous
destinations in the navigation system and
address book entries. In addition, any activa-
ted PIN protection, which you have used to
protect your data against unwanted export,
will be deactivated. Resetting is recommen-
Reset function
Export Export Data Data.
Memory Card Memory Card or
47