Menu; Backlighting; Key Beeps - GME TX3345 Instruction Manual

Menu

the menu provides a convenient way to customise your radios
settings.
he following menu options are available.
t
MENu FuNCTION
ITEM
SQl Adjust Squelch Level
CTCSS
Set CTCSS or DCS Code
lIgHT Adjust Display Brightness
COlOR Adjust Display Colour
WHITE
Adjust Colour Saturation
S-METER/ Display S-Meter or Battery
bATT Voltage on the LCD
bEEP
Adjust Key Beep-Tone
Volume
DvC Activate/ Deactivate the
Dynamic Volume Control
To use the Menu
Press and hold the key until the radio beeps. 'sQl' will
MENU
F
be displayed indicating the first menu item (squelch setting
mode) is selected.
Briefly press the MENU key to cycle through the menu items.
F
Press the
or keys to adjust the selected menu item.
When finished, press and hold the
or wait until the menu times out.
To adjust the Squelch sensitivity from the Menu
1. Press and hold the
MENU
F
will enter menu mode and 'sQl' will be displayed.
2. Press the or
3. When your adjustment is complete, briefly press the
key to return to normal operation.
t X 3 3 4 5
AvAIlAblE
SETTINgS
SQL--1 TO SQL--9
CTCOF
CTC01 -> CTC50
DC001 -> DC104
See Display
See Display
See Display
S-MET / BATT
VOL--0 -> VOL--9
DVCOF / DVCON
key to exit the menu
MENU
F
key for several seconds. the radio
keys to adjust the squelch value.

bACKlighting

the liquid crystal display and keys are backlit for easy viewing
at night. the backlight remains on while the radio is switched
on. the backlighting brightness, colour and saturation are all
fully adjustable for personal preference.
To adjust the backlighting:
1. Press and hold the
will enter menu mode and 'sQl' will be displayed.
2. Press the
MENU
F
3. Press the
brightness.
4. Press the
MENU
F
5. Press the
the full spectrum of colours is available.
6. Press the
MENU
F
7. Press the
colour saturation of the selected backlight colour from full
colour to white (no colour).
8. to exit, press and hold the
to time out.
For the deepest colour range, reduce the WhitE setting.
TIP:

Key beePs

the key beeps act as confirmation of your key presses. you can
adjust the volume level of the beeps as follows.
1. Press and hold the
will enter menu mode.
2. Press the
MENU
F
3. Press the
0 (silent) to 9 (loud).
4. to exit, press and hold the
MENU
time out.
F
i n s t r u c t i o n m A n u A l
key for several seconds. the radio
MENU
F
key repeatedly until 'liGht' is displayed.
or keys to adjust the backlight
key briefly. 'color' is displayed.
or keys to adjust the backlight colour.
key briefly. 'WhitE' is displayed.
or keys to adjust the whiteness or
key or wait for the menu
MENU
F
key for several seconds. the radio
MENU
F
key repeatedly until 'BEEP' is displayed.
or keys to adjust the beep volume from
key or wait for the menu to
MENU
F
PA G E 7