GME TX3220 Instruction Manual
  1. Manuals
  2. Brands
  3. GME Manuals
  4. Radio
  5. TX3220
  6. Instruction manual

GME TX3220 Instruction Manual

Compact uhf radio
Hide thumbs
Table of Contents

Advertisement

Quick Links

TX3220
COMPACT
UHF RADIO
I N S T R U C T I O N M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for GME TX3220

Summary of Contents for GME TX3220

  • Page 1 TX3220 COMPACT UHF RADIO I N S T R U C T I O N M A N U A L...

  • Page 2: Table Of Contents

    Squelch ......3 GME After Sales service ....12 Duplex Switch.

  • Page 3: Operation

    Briefly press the SQL key. A low beep with be heard. easy viewing at night or in low light situations. The back If there are no signals present you will hear the receiver’s lighting is on at all times while the TX3220 is turned on. background noise. SELECTINg ChANNELS...

  • Page 4: Duplex Switch

    The Priority Channel feature allows you to store one of the channel selector knob. ‘BUSY’ will flash indicating the 40 channels in the TX3220 as a priority channel that can be TX3220 is now in the Squelch Edit mode (you can now instantly recalled at the press of a key.
  • Page 5 To program your scan channels: 1. Check that the radio is not already scanning. If it is, 1. Check that the TX3220 is not already scanning. If it is, briefly press the SCAN key to cancel the scan function. press the SCAN key to cancel the scan function.

  • Page 6: Time-Out Timer

    • To skip over a busy channel, briefly press the SCAN Your TX3220 allows CTCSS to be enabled or disabled on key twice. individual channels. In addition, the CTCSS tone frequency used is user programmable.

  • Page 7: Ctcss Tone Frequency Chart

    Optional Microphone MC503B 6. If a different transmit tone is required, select it using the channel selector. Press and hold the SQL key to store Skip the tone. 7. now switch the radio OFF then ON again to return to Channel Down Channel Up normal operation.

  • Page 8: Installation

    Removing the Radio when installing the cradle Avoid mounting close to heaters or air conditioners. Screw the mounting cradle to a firm surface and slide the TX3220 Gently into the cradle from the front until it clicks into place. spread...

  • Page 9: High Voltage Warning

    RED + DC POwER CONNECTION The TX3220 is designed for 13.8 Volt DC, negative earth Fuse installations only (i.e. where the negative terminal of the battery is connected to the chassis or frame of the vehicle).

  • Page 10: Repeaters

    Station communicate through repeaters, your radio must be able to transmit and receive on different channels (known as Vechicle Vechicle DuPLEX). your TX3220 has a Duplex key to allow you to operate through repeaters. UhF ChANNELS AND FREQUENCIES Channel Frequency...

  • Page 11: Specifications

    SPECIFICATIONS Receiver ELECTRICAL general Intermediate frequencies: 21.4 Mhz, 450 khz Sensitivity: - 122 dBm for 12 dB Compliant Specification: Meets aS/nZS 4365 for radio SInaD unweighted communications equipment in the UHF citizen and personal Selectivity: - 6 dB at + 7.5 kHz radio service.

  • Page 12: Warranty

    Tel: (09) 274 0955 Fax: (08) 9455 3110 Fax: (07) 3278 6555 Fax: (02) 9816 4722 Fax: (09) 274 0959 for customers outside australia and new Zealand, please contact your local gME retailer or email to: export@gme.net.au Part number: 310219 Drawing number: 43117-3...

Table of Contents