GME TX3345 Instruction Manual page 20

Mounting the cradle
the mounting bracket can be oriented with the arms extending
either forward or backwards to adjust the position of the front
panel with reference to the mounting point
PA G E 2 0
Fitting the radio
Fit radio into cradle and tighten gimbal knobs.
label
once the orientation of your radio is confirmed, you can fit the
GmE model label. simply remove the backing tape and press
into the recess on the front panel.
Fitting the microphone
the microphone uses an 8 pin plug and socket.
to fit the microphone:
1. Position the microphone plug so the plastic tab faces
downwards, and press the plug into the socket until
it 'clicks'.
2. Gently slide the rubber boat towards the hole surrounding
the socket until it is flush with the front panel.
i n s t r u c t i o n m A n u A l
Plastic tab
t X 3 3 4 5