Nuisance Channel Skip; Quick Channel Select; Using Two Group Scan Or Two Open Scan Modes; Selective Calling - GME TX3345 Instruction Manual

nuisAnCe ChAnnel sKiP

if while scanning, a busy channel becomes a nuisance by
constantly causing the scan to pause, you can skip over it by
pressing the SkIP button (or the
radio is paused on that channel. this will temporarily remove
the busy channel from the scan for 30 seconds to allow it time
to become clear. the radio will then resume scanning from the
next channel in the sequence. After 30 seconds the skipped
channel becomes active in the scan again. you can use this
method to temporarily remove multiple busy channels from the
scan if required.
if the unwanted busy channel continues to delay the scan after
the 30 second skip period has elapsed, you can completely
remove that channel from the scan group for the duration of
the current scan session by holding the
radio is paused on that channel. the 'nuisance' channel will
be removed from the scan group for the duration of that scan
session. to restore the channel, simply stop and restart the
scan session using the
SCAN
OS/GS
remove multiple busy channels from the current scan session
if required.
NOTE: in Group scan mode you can also treat the Priority
channel as a nuisance channel and remove it from the scan
session, but if you do, you will no longer be monitoring the
Priority channel while scanning. however if you press the Ptt
you will still be taken straight to the Priority channel when
required to converse on that channel. After your conversation
has finished the scan will continue without the Priority channel
included.

quiCK ChAnnel seleCt

to quickly review or edit channels stored in the current scan
memory, briefly press the
keys to manually step through the stored scan channels.
only those channels that have been stored in the current
scan group memory will be displayed. during this time 'F' will
remain on the display to confirm you are still in 'Quick select'
t X 3 3 4 5
or keys) while the
key while the
SCAN
OS/GS
key. you can use this method to
key then press the
MENU
F
mode. to exit this mode, press the
seconds for the function to time out
using two grouP sCAn or two oPen sCAn
MoDes
if you prefer, the tX3345 can be re-programmed to have two
Group scan modes or two open scan modes instead of one
of each.
your tX3345 can be retailer programmed to convert the Group
scan mode into a second open scan mode and vice versa. if
you would prefer to have two Group scan or two open scan
modes, you should contact your GmE retailer to arrange for
this feature to be enabled (when using two Group scan modes
the Priority channel will be the same channel for both
scan groups).
When the second open or Group scan mode is enabled, the
resulting two scan modes become scan 1 and scan 2.
To select the required scan mode
Press the
MENU
F
'scan 2' will be displayed to confirm your selection. When
enabled, the two scan modes will be identical in operation.
Enabling or disabling the second open or Group scan
NOTE:
mode is not a user selectable option. once enabled by your
GmE retailer, the changed scan mode becomes a permanent
part of the tX3345's features and replaces the standard scan
selection. if you find later that you need the original Group or
open scan function re-enabled, you will need to return your
tX3345 to your retailer for re-programming.
your tX3345 has a selective calling system known as selcall
that operates like a telephone. your radio is pre-programmed
or
with its unique selcall identification number. if this number is
called by another radio, your tX3345 will beep to alert you. if
you do not want to hear any other activity while waiting on a
channel, you can select the Quiet mode. your radio will then
i n s t r u c t i o n m A n u A l
key again or wait 10
MENU
F
key followed by the
SCAN
OS/GS

SElECTIVE CAllING

key. 'scan 1' or
PA G E 1 3