Motorola AP-6521 Series Installation Manual page 16

12 AP-6521 Series Access Point Installation Guide
5. Verify the behavior of the access point LEDs. For more information, see "
page 15.
6. Align the bottom of the ceiling T-bar with the back of the access point.
7. Orient the access point chassis by its length and the length of the ceiling T-bar.
8. Rotate the access point chassis 45 degrees clockwise.
9. Push the back of the access point chassis on to the bottom of the ceiling T-bar.
10. Rotate the access point chassis 45 degrees counter-clockwise. The clips click as they fasten
to the T-bar.
11. Verify the behavior of the access point LEDs. For more information, see "
page 15.
12. The access point is ready to configure. For information on basic access point device
configuration, see "
Defining a Basic Configuration
LED Indicator
LED Indicator
" on page 17.
" on
" on