Table of Contents
Advertisement
Menu
2.3 STATION COS PROGRAM
1
3 .
STATION COS PROGRAM
4. SPK/HEADSET PROGRAM
BACK
2.3.1 COS Down Mode
To activate COS Down Mode, perform the following:
> COS DOWN MODE
SELECT BY [NEXT]
BACK
NEXT
> COS DOWN MODE
ICM ONLY MODE
BACK
NOTE
COS DOWN
MODE
RESTORE COS
MODE
WALKING COS
MODE
To activate Station Class of Service (COS)COS:
With the appropriate selection highlighted,
press the [OK] or
OK
There are three types as follows, and described in the following
sections,
Use the [NEXT] or
OK
Press the [OK] or
Press the [OK] or
OK
Obtain password to make sure COS mode can be restored. When set,
only ICM calls can be initiated. COS can be changed back with Restore
COS Mode.
Can be used to return User Station to normal COS after being in COS
Down Mode (password required).
When in use, User can pick-up the COS level of a station after entering
the appropriate password (one-time use).
- COS DOWN MODE
- RESTORE COS MODE
- WALKING COS MODE
34
button (password is required).
button to select COS DOWN MODE.
button.
button, the mode will be changed.
Advertisement
Table of Contents
