Table of Contents Getting Started LDP-6212D & LDP-6230D Input / Output Devices and Button Cable Connection Getting Started 1. Placing a call 2. Answering an Outside call 3 Soft Button Basic Function 1. Idle 1.1 Pickup 1.2 Conference 1.3 Redial 2.
Page 5
Table of Contents Call Log 1. Received Call 2. Dialed Call 3. Lost Call 3.1 Answer 3.2 Del Cur (Delete Current) 3.3 Del All (Delete All) 3.4 Save 3.5 Name/Tel Program 1. Station name program 2. Mode(H/T/P) PROGRAM 3. Password Register 4.
Page 6
Table of Contents Dial by name 1. Dial By ICM Name 2. Dial By STA SPD name 3. Dial By SYS SPD Name Attendant Function 1.Set or Change the DATE/TIME 2.Change DATE Format 3.Attendant intrusion 4.Overriding an Extension in DND Mode 5.Setting DAY/NIGHT/WEEKEND Mode 6.Storing System Dials 7.Changing Temporary COS(Class of service)
Getting Started LDP-6212D & LDP-6230D LDP-6212D & LDP-6230D are advanced, user-friendly digital keysets, offering the convenience of 3 soft buttons. • Features -.Trendy and Stylish LDP Family design -.Multi Level 3 Line LCD (3 x 24) -.11 or 29 flexible buttons with dual-color LED’s -.Call Log Feature...
Page 9
Getting Started Handset Used for handset call. Earphone-Jack Socket Used to connect optional headset to the phone. Speaker Outputs tones and voice. Speed Button Used to access speed dialing, speed programming, save number redial, and last number redial. DND/Fwd Button The DND (Do Not Disturb) feature blocks all incoming calls.
Getting Started Cable Connection Cable connections A - Connect the telephone cord (curly cord) to the handset and the other end to the handset jack at the bottom of the telephone. B - Connect the line cable to the port at the bottom of telephone and the other end to the wall socket.
Getting Started 1. Placing a Call The following CO access code ‘0’ can be changed by Admin Programming 107 depending on the user’s needs. ICM Line ▶ ▶ talk Lift handset Enter the extension number CO Line Dial 0 or select ▶...
3 Soft Buttons 3 Soft Button The 3 Soft Buttons are located on the bottom of the LCD display. The function of each button changes, subject to call status and progress. The current functions are displayed on the LCD screen, directly above each button. For example, if the user calls a busy extension, busy tone will be heard and the busy status displayed.
Basic Function By pressing one of the 3 soft buttons you are able to select the indicated function. For instance, if you want to select call pickup (as shown below), press the first button on the left. If there are more than three functions available at any point, an arrow will be displayed on the LCD display.
Basic Function 1.2 Conference You can establish a Conference with up to 15 parties. The other parties in the Conference may be internal or external. Dial the desired station number. CALL TO STA 100 (e.g.100) FEB 01 04 05:34 pm Station 100 answers the call.
Basic Function 1.3 Redial The last number dialed on an external call is automatically saved in the LAST Number& Redial (LNR) buffer Or Call Log Buffer. ※ See the Page 26. Press the [REDIAL] button. STATION 100 (T) FEB 01 04 05:34 pm PICKUP CONF...
Basic Function 4. Intercom Ring Back : Press to leave a your station number or message. CALL TO STA 100 FLASH : Press to disconnect the line and re-seize. FEB 01 04 05:34 pm FLASH 5. Intercom Busy : Press to leave your station number or message. BUSY : STA 100 CAMP-ON : Press to send a call waiting tone to a busy station [CALL BK]...
Basic Function 9. Intercom Talk TRANS : Press to transfer an incoming call to another station. CALL FROM STA 104 CONF : Press to initiate a conference call. FEB 01 04 05:34 pm MUTE : Press to mute the handset, speakerphone, or headset TRANS CONF MUTE...
Basic Function 12. CO Talk TRANS : Press to transfer a call to another station. 123456789 CONF : Press to initiate a conference call. LINE 08 00:00:03 MUTE : Press to mute the handset, speakerphone, or headset MUTE → TRANS CONF microphone.
Basic Function 15. Paging You may receive announcements from other stations and/or external speakers. Stations are assigned to one or more of the Internal Page Zones. The system has one External Page Zones that are connected to external speakers. MEET ME : Press to answer a paging request. PAGE FROM STA 103 20 AUG 04 11:51am...
Basic Function 17. FLEXIBLE BUTTON PROGRAM • Press the [TRANS/PGM] button • Press the flexible button to be programmed • Enter the desired feature code below table. • Press the [HOLD/SAVE] button to save *) The following Numbering Plan code can be changed by Admin Programming 104-107, 109 depending on the user’s needs.
Basic Function 18. PARK A CALL AND RETRIEVE A PARKED CALL A call can be parked in a parking location and the call will be retrieved by dialing the location number. (The call can be picked up by other extension.) •...
Basic Function 21. USE MY VOICE MAIL (VMIB CARD REQUIRED) When VMIB is installed, Voice mail service can be used. To record a personal greeting, - Press the [TRANS/PGM] button and dial “6 1”. - Press # to start recording. To forward my phone to Voice Mail, - Press the [SPEAKER] button - Press the [DND/FWD] button...
Basic Function 22. CALL BACK When a called station is in busy, call back can be requested. : Press to request call back. BUSY : STA 105 CAMP-ON : Press to send a call waiting tone to a busy station. [CALLBK] CAMP(*) STEP FLASH...
Call Log The call log feature enables the LDP phone user to view a log of the last(15~50) incoming and outgoing CO calls. The user can scroll through the list of numbers stored, select the number and activate a redial to that number. Call Log Button PGM : PGM + Flexible + PGM ’57’...
Call Log 2. Dialed Call Press [OK] . 1. RECEIVED CALL DIALED CALL Press [OK]. 123456789 02/01 09:02 BACK 123456789 LINE 01 00:00:03 MUTE → TRANS CONF NOTE NOTE BACK Return to the previous...
Call Log 3. Lost Call Press [OK]. LOST CALL ∧ Press the [SELECT] button to select the following 0123456789 functions: ANSWER, DEL CUR (delete current) 03/10 16:02 CNT :01 DEL ALL (delete all), SAVE, NAME/TEL BACK SELECT> ANSWER 3.1 ANSWER 0123456789 03/10 16:02...
Call Log 3.3 DEL ALL Press [SELECT] until [DEL ALL] appears in display. 0123456789 Press [DEL ALL] to initiate ‘delete all’ function. 14/07 16:02 CNT :01 BACK SELECT > DEL ALL ALL CLI DELETE Press the [HOLD] button to confirm ‘delete all’ function. Press HOLD Key All numbers are erased.
Program 1. BASIC PROGRAM Dial’4’ and enter the name. ※ For detailed information about entering ENTER NAME ( ) name, see the page 55. And press [ HOLD / SAVE ]. [7] SUPPLEMENTARY Press [TRANS/PGM and press ▽ 3times] [*] SYSTEM Dial ’7’...
Program 2. MODE(H/T/P) PROGRAM ENTER ICM ANS MODE Press [TRANS / PGM] and dial 12. H(1) T(2) P(3) And press [HOLD] STATION 100(H) FEB 01 04 05 : 34pm ※ There are three types as follows; HANDSFREE MODE -. HANDSFREE MODE -.
Program 3. PASSWORD REGISTER Press [TRANS/PGM] and dial 31. ENTER PASSWORD : Enter password (3~11 digits) and #. e.g.) 123456# 4. PASSWORD CHANGE Press [TRANS/PGM] and dial 32. ENTER CURRENT PASSWORD Enter the current password and #. ENTER PASSWORD : e.g.) 123456# Enter the new password and #.
Program 6. WAKE UP PROGRAM 6.1 Setting [1] SET WAKE UP TIME Press [TRANS/PGM] and dial 4. [2] WAKE UP DISABLE Dial 1. ENTER YOUR WAKEUP TIME Enter the time and select single time or every day (for HH:MM 10:10 am every day, dial #.) -S:Single (once only - Default) -C:Every Day ( # )
Program 6.2 Canceling [1] SET WAKE UP TIME Press [TRANS/PGM] and dial 4. [2] WAKE UP DISABLE Dial 2. ERASED WAKEUP TIME 07 : 00-S *10:34 pm Press [HOLD]. 7. PRESELECTED MSG PGM 7.1 Select the MSG PGM Press [TRANS/PGM] and dial 5. [1] SET PRESELECTED MSG [2] SET CUSTOM MSG Dial 1.
Program 7.2 Canceling / Changing Press [TRANS/PGM] and dial 5. [1] SET PRESELECTED MSG [2] SET CUSTOM MSG Dial 1 and #. Press [HOLD] MASSAGE DE-ACTIVATED Press HOLD KEY THE PRESELECTED MESSAGE TYPE 0 0 USER CUSTOM MSG 00 0 1 LUNCH RETURN AT XX:XX 0 2 ON VACATION / RETURN AT DATE XX:XX 0 3 OUT OF OFFICE/ RERURN AT TIME XX:XX 0 4 OUT OF OFFICE/ RETURN AT DATE XX:XX...
Program 8. STATION COS PROGRAM 8.1 COS DOWN MODE Press [TRANS/PGM] and dial 2. [1] COS DOWN [2] COS RESTORE Dial 1 to down cos. ICM ONLY MODE Press HOLD KEY...
Program 8.2 RESTORING COS MODE Press [TRANS/PGM] and dial 2. [1] COS DOWN [2] COS RESTORE Dial 2 to restore COS. ENTER CURRENT PASSWORD Enter the current password and #. ORIGINAL COS RESTORED STATION 100(H) 05 MAR 06 09:51 PICKUP CONF REDIAL 8.3 WALKING COS MODE Press [TRANS/PGM] and dial 23.
Program 9. SPK/HEADSET PROGRAM SELECT SPEAKER/HEADSET Press [TRANS/PGM] and dial 75. ( 1: SPK 0: HEADSET) : 1 For headset, dial 0 and press[HOLD]. 10. EAR MIC PROGRAM Press [TRANS/PGM] and dial 17. EAR-MIC HEADSET To enable, dial 1 and press[HOLD]. (1 : ON/ 0: OFF) :OFF...
Program 11. SPEED PROGRAM Press [TRANS / PGM] and [ SPEED]. Enter the speed bin number. ENTER SPD BIN NO(000) e.g.)007 PAUSE FLASH D-TONE Enter the phone number. ENTER CO-BTN/DIGIT (007) e.g.)123456789 PAUSE FLASH D-TONE To delete programmed number, press [HOLD]. Press [HOLD].
Program 12. CONFERENCE ROOM PGM 12.1 CREATE CONF ROOM Press [TRANS/PGM] and dial 43. Enter conference room number. DIAL NO(1-9) AND PASSWD And password. e.g.) 9+12345 Press [HOLD]. Press HOLD KEY 12.2 DELETE CONF ROOM Press [TRANS/PGM] and dial 44. Enter conference room number DIAL NO(1-9) AND PASSWD and password.
Program 13. HOT DESK PROGRAM 13.1 HOT DESK LOG IN DUMMY STATION 107 Press [SPEAKER] button. And dial the authorization code and #. DUMMY STATION 107 Enter password.(3~11 digits) and ‘#’ ENTER PASSWORD : e.g.)55555 STATION 148 (T) 06 SEP 04 04:00pm PICKUP CONF...
Dial by name 1. Dial By ICM Name Press [SPEED] twice and dial 1. DIAL BY ICM NAME 2. DIAL BY STA SPD NAME :CCC (105) Use the ▼ or ▲ button to select the desired number 2:DDD (107) and press the [SEND] button to call. BACK SEND Talk.
Dial by name 2. Dial By STA SPD Name 1. DIAL BY ICM NAME Press [SPEED] twice and dial 2. DIAL BY STA SPD NAME To check the number of the selected name, press the 1:ABC(001) [NAME/TEL] button. 2:DEF(002) Use the ▼ or ▲ button button to select the desired BACK NAME/TEL SEND...
Attendant Function 1. SET OR CHANGE THE DATE/TIME • Press the [TRANS/PGM] button • Dial “0 4 1” • Enter Date as MMDDYY( MM: month, DD:day, YY:year ) • Press the [HOLD/SAVE] button • Enter the Time in 24 hour format(1630 for 4.30pm) •...
Attendant Function 4. OVERRIDING AN EXTENSION IN DND MODE Attendant can override station in DND. • Call a station in DND(DND tone is heard). • Dial “*” to override the extension The station in DND will receive ring. 5. SETTING DAY / NIGHT/ WEEKEND MODE When a CO call comes in the system, the destination of CO call can be changed according to ring mode.There are 5 ring modes –...
Attendant Function 6. STORING SYSTEM DIALS ENTER SPEED BIN NO(2000) • Press the [TRANS/PGM] button. • Press the [SPEED] button. PAUSE FLASH D-TONE • Dial the Speed Bin Number(2000-2499) ENTER CO-BTN/DIGIT(2000) PAUSE FLASH D-TONE 1234567 • Dial the phone number to be stored. •...
Forward – calls can be sent to another location such a voicemail or another station DKTU Digital Key Telephone Unit – an LG-Ericsson digital telephone Single Line Telephone – an analogue telephone VMIB Voice Message Interface Board – LG-Ericsson integral Voice...
Page 50
Table of Contents Getting Started LIP-6000 Series Model 6012D & 6030D Input / Output Devices and Button Cable Connection 3 Soft Button Basic Function 1. Idle 1.1 Pickup 1.2 Conference 1.3 Redial 2. Off Hook 3. Intercom Dialing 4. Intercom Ring Back 5.
Page 51
Table of Contents Program 1. Station name program 2. Mode (H/T/P) Program 3. Password Program 3.1 Password Register 3.2 Password Change 4. Language Program 5. Wake up Program 5.1 Setting 5.2 Canceling 6. Pre-selected MSG PGM 6.1 Select the MSG PGM 6.2 Canceling/ Changing 7.
Getting Started LIP-6000 Series, Model 6012D & 6030D LIP-6012D/6030D are advanced, user-friendly IP Phones, offering the convenience of 3 soft buttons. • Features -.Trendy and Stylish LIP Family design -.Multi Level 3 Line LCD (3 x 24) -.11 or 29 Flexible buttons with dual-color LED’s -.Call Log Feature -.Wall Mountable (Bracket Optional) LIP-6012D...
Page 54
Getting Started Handset Used for handset call. Earphone-Jack Socket Used to connect optional headset to the phone. Speaker Outputs tones and voice. Speed Button Used to access speed dialing, speed programming, save number redial, and last number redial. Dnd/Fwd Button The DND (Do Not Disturb) feature blocks all incoming calls.
3 Soft Buttons 3 Soft Button The 3 Soft Buttons are located on the bottom of the LCD display. The function of each button changes, subject to call status and progress. The current functions are displayed on the LCD screen, directly above each button. For example, if the user calls a busy extension, busy tone will be heard and the busy status displayed.
Basic Function By pressing one of the 3 soft buttons you are able to select the indicated function. For instance, if you want to select call pickup (as shown below), press the first button on the left. If there are more than three functions available at any point, an arrow will be displayed on the LCD display.
Basic Function 1.2 Conference Dial the desired station number. CALL TO STA 100 (e.g.100) FEB 01 04 05:34 pm Station 100 answers the call. FLASH Press [CONF] button. CALL TO STA 100 FEB 01 04 05:34 pm TRANS CONF MUTE Dial the phone number of the next desired station.
Basic Function 1.3 Redial Press the [REDIAL] button. STATION 100 (T) FEB 01 04 05:34 pm PICKUP CONF REDIAL Press the [Volume] button and repeat until the Desired 123456789 number appears, then press[OK] button to call. 01/2 13:11 BACK DELETE Talk 123456789 LINE 008...
Basic Function 4. Intercom Ring Back : Press to leave a your station number or message. CALL TO STA 100 FLASH : Press to disconnect the line and re-seize. FEB 01 04 05:34 pm FLASH 5. Intercom Busy : Press to leave your station number or message. BUSY : STA 100 CAMP-ON : Press to send a call waiting tone to a busy station [CALLBK]...
Basic Function 9. Intercom Talk TRANS : Press to transfer an incoming call to another station. CALL FROM STA 104 CONF : Press to initiate a conference call. FEB 01 04 05:34 pm MUTE : Press to mute the handset, speakerphone, or headset TRANS CONF MUTE...
Basic Function 12. Checking messages NEXT : Press to move to the next message. VMIB MSG FROM EXTERNAL REPEAT : Press to repeat the current message. DELETE : Press to erase the current message. REPEAT DELETE → NEXT : Press to tag the current message with your comment VMIB MSG FROM EXTERNAL before forwarding.
Call Log 2. Dialed Call Press [OK]. 1. RECEIVED CALL DIALED CALL Press [OK]. 123456789 02/01 09:02 BACK DELETE 123456789 LINE 125 00:00:03 MUTE → TRANS CONF NOTE NOTE BACK Return to the previous...
Call Log 3. Lost Call Press [OK]. LOST CALL ∧ Press the [SELECT] button to select the following 0123456789 functions: ANSWER, DEL CUR (delete current) 03/10 16:02 CNT :01 DEL ALL (delete all), SAVE, NAME/TEL BACK SELECT> ANSWER 3.1 ANSWER 0123456789 03/10 16:02...
Call Log 3.3 DEL ALL Press [SELECT] until [DEL ALL] appears in display. 0123456789 Press [DEL ALL] to initiate ‘delete all’ function. 14/07 16:02 CNT :01 BACK SELECT > DEL ALL ALL CLI DELETE Press the [HOLD] button to confirm ‘delete all’ function. Press HOLD Key All numbers are erased.
Program 1. STATION NAME PROGRAM Press [TRANS/PGM] and press ▽ 3times. [7] SUPPLEMENTARY [*] SYSTEM Dial ‘7’ and press▽. [3] BGM [4] REGISTER STA NAME Dial ’4’ and enter the name. ENTER NAME ( ) ※ For detailed information about entering name, see the page 46.
Program 2. MODE(H/T/P) PROGRAM Press [TRANS/PGM] and dial’12’. ENTER ICM ANS MODE H(1) T(2) P(3) Dial ‘1’ for handsfree mode. HANDSFREE MODE H(1) T(2) P(3) ※ There are three types as follows; -. HANDSFREE MODE -. TONE MODE -. PRIVATE MODE And press [HOLD/SAVE].
Program 3. PASSWORD PROGRAM 3.1 PASSWORD REGISTER Press [TRANS/PGM] and dial’31’. ENTER PASSWORD : Enter password (3~11 digits) and #. e.g.) 123456#. 3.2 PASSWORD CHANGE Press [TRANS/PGM] and dial’32’. ENTER CURRENT PASSWORD Enter the new password and #. ENTER PASSWORD : e.g.) 123456# Enter the new password and #.
Program 4. LANGUAGE PROGRAM [1] LCD DISPLAY LANGUAGE Press [TRANS/PGM] and dial7. [2] MPB And dial ‘1’ to change LCD display language. 5. WAKE UP PROGRAM 5.1 Setting [1] SET WAKE UP TIME Press [TRANS/PGM] and dial’4’ and ‘1’. [2] WAKE UP DISABLE Enter the time and select single time or every day.
Program 5.2 Canceling Press [TRANS/PGM] and dial4. [1] SET WAKE UP TIME [2] WAKE UP DISABLE Dial’2’ and press [HOLD./SAVE]. ERASED WAKEUP TIME 07 : 00-S *10:34 pm 6. PRESELECTED MSG PGM 6.1 Select the MSG PGM [1] SET PRESELECTED MSG Press [TRANS/PGM] and dial’5’.
Page 72
Program 6.2 Canceling Press [TRANS/PGM] and dial’5’. [1] SET PRESELECTED MSG [2] SET CUSTOM MSG Dial ‘1’ and #. Press [HOLD/SAVE]. MESSAGE DE-ACTIVATED Press HOLD KEY THE PRESELECTED MESSAGE TYPE 0 0 USER CUSTOM MSG 00 0 1 LUNCH RETURN AT XX:XX 0 2 ON VACATION / RETURN AT DATE XX:XX 0 3 OUT OF OFFICE/ RERURN AT TIME XX:XX 0 4 OUT OF OFFICE/ RETURN AT DATE XX:XX...
Program 7. STATION COS PROGRAM 7.1 COS DOWN MODE Press [TRANS/PGM] and dial 2. [1] COS DOWN [2] COS RESTORE Dial 1 to down COS. ICM ONLY MODE Press HOLD KEY 7.2 RESTORING COS MODE Press [TRANS/PGM] and dial 2. [1] COS DOWN [2] COS RESTORE Dial 2 to restore COS.
Program 8. SPK/HEADSET PROGRAM Press [TRANS/PGM] and dial 75. SELECT SPEAKER/HEADSET ((1: SPK 0: HEADSET) : 1 For headset, dial 0 and press [HOLD/SAVE]. 9. EAR MIC PROGRAM Press [TRANS/PGM] and dial 17. EAR-MIC HEADSET To enable, dial 1 and press [HOLD/SAVE]. (1: ON 10:0 OFF) : OFF...
Program 10. SPEED PROGRAM Enter the speed bin number. ENTER SPD BIN NO(000) e.g.)007 PAUSE FLASH D-TONE Enter the phone number. ENTER CO-BTN/DIGIT (007) e.g.)123456789 PAUSE FLASH D-TONE To delete programmed number, press [HOLD/SAVE]. Press [HOLD/SAVE]. 123456789 SPEED 007 PAUSE FLASH D-TONE Enter the name.
Program 11. CONFERENCE ROOM PGM 11.1 CREATE CONF ROOM Press [TRANS/PGM] and dial 43. DIAL NO(1-9) AND PASSWD Enter conference room number and password. e.g.) 9 + 12345 Press [HOLD/SAVE]. Press HOLD KEY 11.2 DELETE CONF ROOM Press [TRANS/PGM] and dial 44. DIAL NO(1-9) AND PASSWD Enter conference room number and password.
Program 12. HOT DESK PROGRAM 12. HOT DESK LOG IN DUMMY STATION 100 Press [SPEAKER] button. DUMMY STATION 100 Enter password (3-11 digits) and #. ENTER PASSWORD : e.g.)55555# STATION 217 (T) 06 SEP 04 04:00pm PICKUP CONF REDIAL 6.2 HOT DESK LOG OUT Press [TRANS/PGM] and dial ※※.
Dial by name 1. Dial By ICM Name Press [SPEED] twice and dial 1. DIAL BY ICM NAME 2. DIAL BY STA SPD NAME Use the ▽ or △ button to select the desired number :CCC (105) 2:DDD (107) and press the [SEND] button to call. BACK SEND Talk.
Dial by name 2. Dial By STA SPD Name 1. DIAL BY ICM NAME Press[SPEED] twice and dial 2. DIAL BY STA SPD NAME To check the number of the selected name, press the 1:ABC(001) [NAME/TEL] button. 2:DEF(002) Use the ▽ or △ button to select the desired number BACK NAME/TEL SEND...
Hunt Groups DKTU Digital Key Telephone Unit – an LG-Ericsson digital telephone Single Line Telephone – an analogue telephone VMIB Voice Message Interface Board – LG-Ericsson integral Voice...