LG-Ericsson LDKP-7224D Quick Reference Manual

LG-Ericsson LDKP-7224D and LDP-7208D
Call Transfer
To transfer a call:
1. While on a live call, press the TRANS/PGM button.
2. Enter the extension number you are transferring
to (or press a pre-programmed DSS key for the
extension).
3. Hang up the phone.
If you want to announce the transfer to the extension
stay on the line, the call will not transfer until the
transferring party hangs up.
To transfer directly to voice mail:
1. While on a live call, press TRANS/PGM.
2. Press Callback.
3. Enter the extension number (ex. 222).
4. Hang up the receiver.
Programming Speed Dial (Personal)
1. Press TRANS/PGM and then Speed.
2. Enter the bin # (001- 100) for personal speed dial
numbers.
3. Enter the telephone number and press Hold/Save.
4. Enter the name and press Hold/Save. (Reference the
user guide for instructions on how to type names.)
To program a speed dial number to a DSS key:
1. While on hook (set hung up), press TRANS/PGM.
2. Press the Flex Button (DSS Key) that you want to
program or change.
3. Press the far left button below the display (Up
Arrow) below the words in the display "Tel Num".
4. Enter the telephone number that you want as a
speed dial.
5. Press Hold/Save.
6. Enter the name.
7. Press Hold/Save.
Changing Ring Tones
1. Press TRANS/PGM
2. Press 1.
3. Press 8 for intercom ring or 9 for CO ring type.
4. Enter ring type (01-15).
5. Once you have the ring you want press the Hold/
Save key.
10012012
Quick reference guide
Conference
1. When on a call, press the Conference button. You
will hear dial tone.
2. Dial the second telephone number.
3. While the phone is ringing, or after the second call is
established, press the Conference key twice.
Notes:
The telephone installer must assign a conference
key to the set.
is being established and it will go solid red when
the second party is connected to the conference.
The system also allows you to set up conference
rooms if you need more than 3 parties. All calls
must be transferred to the conference room from
the attendant.
Call park
To park a call:
1. Press TRANS/PGM.
2. Dial the Park location 601-610.
3. Replace the handset or go on-hook.
4. Page the desired user to retrieve the call if
applicable.
OR
1. While on a live call, press Park.
2. Verify parking location before announcing the
waiting call.
Note: The telephone installer will need to program a
"call parking location" key for this to work.
To retrieve the parked call from a system phone:
1. Lift the handset or press the On/Off button.
2. Dial the Park location to retrieve the call.
Transferring Calls Externally
1. While on a live call, press Trans/PGM.
2. Dial 9 and then the telephone number or press the
pre-programmed DSS key.
Hang up to transfer the call or stay on the line to
announce the call before the transfer.