Table of Contents
Advertisement
Getting Started
1
2
Earphone Jack
3
4
Speed Button
5
DND/Fwd Button
6
Speaker Button
7
Hold/Save Button
8
3 Soft Buttons
LCD Display
9
10
Visual Ringing LED
11
TRANS/PGM Button
12
Flexible Button
13
Call Back Button
14
Volume Button
15
Microphone
16
Menu Button
17
Phonebook Button
Handset
Used for handset calls.
Used to connect an optional headset to the phone.
Speaker
Tone and voice output.
Used to access speed dialing, speed programming, saved number
redial, and last number redial.
The DND (Do Not Disturb) feature blocks all incoming calls; when DND
is active, the red LED is illuminated.
Used to activate speakerphone (red LED will illuminate), also used to
initiate call forward (transfer call to another station or voicemail, the red
LED will flash).
Used to put a call on hold or save information when programming.
Used in conjunction with fixed and flexible features, and function
changes related to call progress (indicated on the LCD display).
Displays information about telephone status, dialing directories and test
message information.
Illuminates when the phone is ringing.
Used to initiate a call transfer (TRANS) or to enter programming mode
(PGM).
Some flexible buttons are pre-programmed in the system for line
appearances, loop functions etc. The remaining flexible buttons can be
user-programmed.
A station can initiate a call back request to a busy station. Once that
station becomes idle, the initiating station is signaled.
Adjusts the audio levels for ringing, handset and speakerphone.
Hands-free
Microphone is used for hands-free speakerphone function.
Used to move to the desired option (Dial, MSG, Program), and to select
the next screen when indicated by an arrow on the LCD display.
Used to access speed dialing, save number redial, and last number
redial, and to access flexible button programming.
3
Advertisement
Table of Contents
