Monitor Connection - EverFocus ECOR960 4F2 User Manual

2.2.1 Monitor Connection

Connect the monitor to the HDMI, VGA or BNC port on the rear panel of the DVR. The ECOR960 4F2 /
8F2 / 16F2 DVR provides 2 main monitor outputs with identical functionality - VGA and HDMI.
Both outputs can be used simultaneously and deliver full HD output resolution (1920x1080,
progressive, 60 Hz. vert., 68 KHz hor.).
Make sure that the connected monitor's specifications comply with these resolution requirements
(This figure uses ECOR960 16F2 DVR as an example).
Note:
1. The connected monitors' specifications must comply with the resolution requirements.
2. Do not exceed the max. HDMI cable length of 15 meters. The standard HDMI cables can
support cable length up to 3 meters. For longer distances, such as 15 meters, it is highly
recommended to use high quality HDMI cables.
Call Monitor
BNC Cable
HDMI Cable
Main Monitor Main Monitor
Figure 2-12
16
ECOR960 4F2 / 8F2 / 16F2
VGA Cable