Appendix E: Ir Remote Control - EverFocus ECOR960 4F2 User Manual

Appendix E: IR Remote Control

The IR remote control is an accessory to enhance the convenient operation of the DVR. You can
perform all the settings and operations from the remote control. The effective distance is up to 33
feet line of sight.
When there is more than one DVR installed in the same environment, you need to select a correct
DVR ID, preventing the DVR from responding to commands from the Remote Control.
To select the DVR ID,
1. Aim at the IR receiver of your DVR.
2. Press the DVR Device Button.
3. Select the DVR ID number by pressing the Number Button. The DVR ID number here must
correspond to the "IR Remote ID" set up in the "I/O Control Menu".
To switch channels,
To select CH1~9, press Number Button 1~9.
To select CH10~16, press the "0" button first to change the Number Button 1~7 as CH10~16, and
then press the Number Button 1~7 to switch to the desired channel. For example, if you want to
select CH11, press "0" first, and then press "2".
DVR Device Button
Number Button
Channel Switching
Button
139
ECOR960 4F2 / 8F2 / 16F2
Appendix
E