Multi-Purpose Operating Tool; Riddling; Fire Door Glass - Aarrow Apex Operating & Installation Manual

MULTI - PURPOSE OPERATING
TOOL
Your Aarrow fire comes with a multi-purpose tool,
which is used for, riddling and setting the multifuel
grate position and for emptying the ash pan. (Fig. 4)

RIDDLING

Use the operating tool for setting the grate in the
coal burning position or the wood burning position.
This means that effective de-ashing (see page 13)
takes place, and also allows the grate to be set in the
coal burning or wood burning position, as
indicated on the right hand side of the appliance.
REMOVING FIRE DOOR
•The door should be removed from the stove so that
replacing the glass can be carried out on a
workbench or similar level surface. This should be
done when the appliance is cold.
Remove the fire door as follows
•Support the fire door in a slightly opened position
and loosen the four screws holding the fire door and
hinge covers in place (fig 5a)
•Remove the hinge covers (fig 5b)
•Continue to remove all four screws and the fire
door.
•To replace the fire door loosely screw the fire door
in place and insert the door hinge covers before
fully tightening screws.
Apex Multifuel Stoves
Fig. 4
OPERATING INSTRUCTIONS
Fig. 5a loosening fire door.
Fig. 5b Removing door hinge covers.

FIRE DOOR GLASS

In the event of the door glass being broken it can
easily be replaced:
•The door should be removed from the stove as
detailed above.
•Unscrew the four screws on the inside of the door
(fig 6a).
Fig. 6a Unscrewing glass clips.
9