Connections (Bvm-F250); Connecting The Controller (Bkm-16R) - Sony BVM-F250 Operation Manual

Connections (BVM-F250)

Note on connecting the cable to the DC 5V OUT
connector
Be sure to plug the male connector of the cable into the DC
5V OUT connector of the monitor.
Insert the connector so as to fit the shape of the DC 5V
OUT connector.
28
Connections (BVM-F250)
Plug the male
connector into
the monitor.
Connecting the Controller (BKM-
16R)
BVM-F250
NETWORK switch
t Set to PEER TO
PEER.
LAN (10/100) connector
SMF-700, etc.
DC 5V/12V IN
Controller
connector
(BKM-16R)
NETWORK switch
tSet to PEER TO PEER.
1
Turn off the MAIN POWER switch of the monitor
before connecting the units.
2
Set the NETWORK switches of the monitor and the
controller to PEER TO PEER.
3
Connect the LAN (10/100) connector of the monitor
and the LAN (10/100) connector of the controller by
using the SMF-700 or the cable supplied with the
BKM-37H/38H, or a 10BASE-T/100BASE-TX
straight LAN cable (shielded-type, optional).
Note
When an optional LAN cable is connected, use a
shielded-type cable to prevent a malfunction due to
noises.
4
Connect the DC 5V OUT connector of the monitor and
the DC 5V/12V IN connector of the controller by using
the SMF-700 or the cable supplied with the BKM-37H/
38H.
Or connect the output cable of the AC adaptor supplied
DC 5V OUT
connector
LAN (10/100)
connector