Selecting The Monitor (Designation Of The Monitor Or Group Id Number) - Sony BVM-F250 Operation Manual

BVM-F170
Controller
(BKM-16R)
2
Set the different IP address to each monitor and the
controller.
Monitor: Set the IP address in the Network Setting
menu (page 73) of the System Configuration menu.
Controller: Set the IP address in the Network Setting
menu (page 83) of the Controller menu.
3
Set Monitor ID and Group ID in the Network menu
(page 73) of the System Configuration menu.
Set the different monitor ID number to each monitor
and if necessary, group ID number.
You can use the numbers 1 to 99 as a monitor ID
number or group ID number.
4
Set the NETWORK switches of the monitor and the
controller to LAN.
BVM-F250
NETWORK switch
tSet to LAN.
Controller
(BKM-16R)
36
Settings
NETWORK switch
t Set to PEER TO PEER.
NETWORK switch
tSet to PEER TO PEER.
NETWORK switch
tSet to LAN.
BVM-F170
Controller
(BKM-16R)
Selecting the Monitor (Designation
of the Monitor or Group ID Number)
When the multiple monitors are connected by the network
connections, you can remotely connect the monitors from
the controller by designating the set monitor ID number or
group ID number.
Display window
Lamp
3
2
1
Press the corresponding button to select the connection
mode.
SINGLE button: Selects single connection mode.
The designated monitor is connected remotely.
The monitor ID number is displayed on all connected
monitors when the button is held pressed.
GROUP button: Selects group connection mode.
NETWORK switch
tSet to LAN.
NETWORK switch
tSet to LAN.
1
2
3