Sony BVM-F250 Operation Manual page 16

The OVER RANGE lamp may indicate an error or
warning. For details, see "Error/warning display by the
lamp" (page 16).
d ECO lamp
The color of the lamp changes according to the power
consumption status of the monitor. The color changes from
green to yellow to magenta in order of greater power
consumption. Decreasing the luminance of the screen by
adjusting brightness/contrast is recommended when the
lamp lights in yellow or magenta.
The lamp starts flashing rapidly approximately one minute
before the screen saver is activated. Flashing slows in
green when the screen saver starts.
The ECO lamp may indicate an error or warning. For
details, see "Error/warning display by the lamp"
(page 16).
Error/warning display by the lamp
The OVER RANGE lamp, OPERATE lamp and/or ECO
lamp on the front panel may show an error or warning
while the monitor is being operated.
If the error or warning is shown, please contact your Sony
representative.
Error display
ECO OVER
lamp RANGE
lamp
Lights in Lights in
yellow amber
Lights in Flashes in
yellow amber
Flashes in Lights in
yellow amber
Lights in Flashes in
magenta amber
Flashes in Lights in
magenta amber
Warning display
ECO OVER
lamp RANGE
lamp
Flashes in
amber
–
Lights in
–
amber
–: Status except for error display.
16
Location and Function of Parts (BVM-F250)
OPERATE Symptoms
lamp
Flashes in The power in the
red panel part is unusual.
Flashes in The temperature in
red the panel part is
unusual.
Flashes in The ambient
red temperature sensor is
unusual.
Flashes in Fan error.
red
Flashes in Device error.
red
OPERATE Symptoms
lamp
The luminance is
reduced to protect the
panel from an
–
increase of
temperature in the
panel part.
Over range
–