Adjusting The Seam Width; Presetting The Seam Width - DURKOPP ADLER 580 Operating Instructions Manual

9.

Adjusting the seam width

9.1

Presetting the seam width

B 2 A 1
Caution: Danger of injury!
Turn the main switch off.
Adjust the seam width only with the machine switched off.
Standard
You can choose among two seam widths:
·
Seam width "Narrow" = Lever 2 mounted in position B
·
Seam width "Wide" = Lever 2 mounted in position A
The seam width "Narrow" is 2.1 mm and "Wide" 3.4 mm.
Attention: Danger of breakage!
The mechanical components of each sewing equipment are to be
used only with one seam width, and so cannot be changed in the
sewing equipment configuration.
When the sewing equipment is changed, the sewing width will
automatically match the sewing equipment.
Both sewing widths - electronical and mechanical must either be both
"narrow" or both "wide".
Under the menu "throw width" it is possible to check the value of the
electronical seam width for the sewing equipment.
When changing the configuration of the sewing equipment and the
sewing width, please make sure to have the corresponding
components of the sewing equipment mounted.
B A 3
3
29