Adjusting The Locking Positions; General Notes - DURKOPP ADLER 580 Operating Instructions Manual

2.

Adjusting the locking positions

2.1

General notes

6
With the help of the locking positions an easy adjustment of the needle
motion to the looper and spreader motions is possible.
When the arm shaft is in locking position, the rotary thread take-up
disc and the eccentrics for the spreaders, the loopers and the
connecting stitch have to be in locking position, too.
The positions have been set by the manufacturer in such a way that
standard material can be sewn with the 580.
If you want to use other needle sizes, thread sizes or materials, you
may have to set positions slightly differing from the staking-out
position.
The locking pins are included in the accessories of the machine and
have a diameter of 5 mm.
3