Menu Item Tension Data - DURKOPP ADLER 580 Operating Instructions Manual

29.4.8 Menu item tension data (Tension data)
92
In this menu the characteristic values for the magnets of the needle
thread tension can be set.
Attention !
Only change the characteristic values of the magnets, when
mounting new magnet.
When ordering new magnet, the corresponding values
are enclosed with.
Changing the characteristic values
–
Press the "F" key.
–
Select the menu "Machine config.".
–
Select the menu "Tension data".
–
Enter the code.
–
Enter value from 1 to
6.