User Interface; Switch Operation (Operating Controls); Switch Operation (Programming Controls) - Bunn ULTRA Technical Training Manual

User Interface

Using the menu-driven display on the front of the dispenser, the operator has the ability to operate, alter or modify
various parameters such as beverage consistency and set day/night "ON/OFF" times. The operator is also prompted
to check a variety of periodic service functions or even a step-by-step cleaning routine.
Ultra 1
Switch Operation (Operating Controls)
This switch is the ON/OFF toggle switch which powers up the dispenser and the LCD display. This switch
is also used as back up switch in menu mode.
Press and release the appropriate (ON/OFF) switch to start the Auger Motor and to turn on AutoFill when
applicable.
Press and release the (OFF/ICE/CHILL) switch and select CHILL to begin the cooling process for the
selected hopper.
Switch Operation (Programming Controls)
To access the programming mode, and to scroll through the different function screens, hidden programming switches
are used. Press and hold for five seconds the "Gourmet" button to enter into the programming menus.
"ULTRA" (left under display)
When prompted by a selection from the menu to answer yes or no, the "ULTRA" switch is used to answer
"NO" or (-) minus.
"GOURMET" (center under display)
Press and hold this switch 5 seconds to access the Menu Function Index. This switch is also used as "NEXT"
to scroll through the functions.
"ICE" (right under display)
When prompted by a selection from the menu to answer yes or no, the "ICE" switch is used to answer "YES"
or (+) plus.
Ultra 2
Bunn-O-Matic Corporation
13