Install Christie-Supplied Program Scripts; Test The Test Pattern - Christie Mirage User Manual

28 Using 3D in Mirage Christie Digital Systems Inc.

Install Christie-Supplied Program Scripts

The program scripts are included on the Christie Digital System Using 3D in
Mirage CD that accompanies this manual.
1. To copy the CDROM disc file unix to the /usr/local/VRCO
directory, type:
cp –r /CDROM/unix/stereo3d_test /usr/local/VRCO/bin
2. To change to the program scripts directory, type:
cd /usr/local/VRCO/bin/stereo3d_test
3. Type: chmod +x *.bat

Test the Test Pattern

1. To run the test pattern, run the batch for the desired resolution:
run_1280x960.bat
or
run_1400x1050.bat
If the graphics card is configured correctly for stereo3D, it should
look like the image below without wearing active stereo3D glasses.
Press the ESC key to close this program window.
Figure 16 Test pattern