Component
Connections
Delay on
High Performance
Basic plus GPIO
cable (no CRT). See
Figure 7 below.
High Performance, increased latency due to CRT
Basic plus CRT and
Step 2.
GPIO. See Figure 8
Match
below.
projector to
CRT
Multiple projectors
1. When working with multiple projectors and a blended display, set up the master projector using one of the High
Performance options noted above.
2. Slave projectors can be set up using the Basic method. Essentially, once the master projector is set up, set the frame
delay to match, and then fine tune these settings as necessary.
4.2. Setup Diagrams
12
Using 3D in Mirage Christie Digital Systems Inc.
Frame
Frame Delay on
Projector
CRT
Step 2. Optimize
with test pattern.
Step 4. Optimize
with test pattern
Basic Setup
Figure 5. Basic setup
Dark Interval
GPIO (3D
Stereo Sync
Locking)
Step 3. Adjust
Step 1. Select
for interaction
option 3, sync
with stereo
to vertical
shutter glasses
output, locked
or z-screen
and inverted
Step 3. Adjust to
Step 1. Select
reduce ghosting
option 5, sync
to input signal,
unlocked and
inverted
Additional Information
High performance, less
latency or delay.
High performance,
increased latency due to
optimization with CRT