4.3. Optimization Procedures
14
Using 3D in Mirage Christie Digital Systems Inc.
High performance Setup with CRT Monitor
This setup requires the use of the Mirage 3D Stereo Sync cable.
Figure 8. High performance setup with CRT Monitor
The optimization steps outlined in this section are all performed with a stereo
3D test pattern. For best results, refer to the Setup Options table on page 11
to determine which steps to complete and in what order. Each step in the
table has a corresponding short procedure in this section.
This section includes the following procedures:
•
Navigating to the Simulation 3D submenu
•
3D Stereo Sync Locking Options
•
Enable Frame Lock.
•
Display the Test Pattern
•
Match projector to CRT
•
Optimize the Frame Delay
•
Optimize the Stereo Sync Delay
•
Optimize the Dark Interval.