Complete The Installation - HAMPTON BAY HB-4190 Series Installation Manual

❒ Stuff the wires into the junction box. Make
sure none of the wires get pinched.
Slide the fixture onto the
mounting screws and
tighten nuts.
❒ Install one 100 Watt max. light bulb, or
three 60 Watt bulbs in candelabra style.
❒ Install the fixture top. Secure with
decorative screws.
❒ After completing the tests on page 5,
caulk fixture mounting surface with
silicone weather sealant.

COMPLETE THE INSTALLATION

Junction
Box
Model 4193 Glass Installation
Rubber Bumpers
❒ Model 4193 only: install the six pieces of
glass by sliding them down as shown. The
glass panels should rest upon the corner
guides on each side, and against the
rubber bumpers at the bottom.
Note: As with any glass, handle with care.
4
Corner
Guides
595-5770-01