Pre-Installation; Planning Installation; Tools Required; Hardware Included - HAMPTON BAY DSHD5979F Use And Care Manual

Pre-Installation

PLANNING INSTALLATION

□
Read all instructions before installing.
□
To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.
IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have occurred
during shipping. If there is a defect in the wire, do not
attempt installation. Please call the Customer Service
Team at 1-855-HD-HAMPTON.
TOOLS RECOMMENDED (NOT INCLUDED)
Screwdrivers
Safety
Goggles
Silicone sealant

HARDWARE INCLUDED

NOTE: Hardware is not shown to actual size.
Part Description
AA
Mounting screw
BB
Wire connector
AA
Quantity
NOTE: This product requires one 60W maximum
medium base (E26) type "A" or type "S"
incandescent lamp or 9W maximum medium base
(E26) self-ballasted LED vintage Edison bulb (sold
separately).
Pliers
Electrical
Tape
Ladder
BB
3
3
3
Please contact 1-855-HD-HAMPTON for further assistance.
Pencil
Drill
HAMPTONBAY.COM