Pre-Installation; Planning Installation; Tools Required; Hardware Included - HAMPTON BAY DSHD5979B Use And Care Manual

Pre-Installation

PLANNING INSTALLATION

□
Read all instructions before installing.
□
To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.
IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have occurred
during shipping. If there is a defect in the wire, do not
attempt installation. Please call the Customer Service
Team at 1-855-HD-HAMPTON.
TOOLS RECOMMENDED (NOT INCLUDED)
Phillips
Screwdriver
Safety
Goggles

HARDWARE INCLUDED

NOTE: Hardware is not shown to actual size.
Part Description
AA Crossbar assembly
(Pre-assembled to fixture body)
BB
Outlet box screw
CC Wire connector
Pliers
Electrical
Tape
AA
Quantity
1
2
3
3
NOTE: This product requires one 60W maximum
medium base (E26) type "A" or type "S" or 9W
maximum medium base (E26) self-ballasted LED
vintage Edison bulb (sold separately).
BB
Please contact 1-855-HD-HAMPTON for further assistance.
Silicone sealant
CC
HAMPTONBAY.COM