Standard Controller Functions - Wine Guardian SS025 Installation, Operation And Maintenance Manual

Standard Controller Functions

Humidity
Temperature
Alarm Indication
Area
Mode Area
.
How to:
Turn system on/off
Change Temperature
Change Humidity
Change Mode --
Cooling/Heating/Auto
Up Button
Down Button
Mode button (right side)
On/Off (left side)
 Press the On/Off" button once. Note:
There is a five-second time delay before
the system turns on or turns off.
 Press the "Up" arrow once. The display
will show the existing temperature set
point.
 Press the "Up" or "Down" arrow buttons
to adjust the temperature to the desired
setpoint.
 Press the "Up Arrow" once. This display
will show the existing temperature
setpoint.
 Press the "Mode" button once to display
the Humidity setpoint.
 Press the "Up" or "Down" arrows to adjust
the humidity to the desired set point.
NOTE: Wine Guardian humidifier must
be installed and setting six set to "1" or
"2" before the controller will display and
allow for changing percent humidity.
.
 Press the "Mode" button once to display
the "Set" function at the bottom of screen.
The existing mode will display next to the
word "Set" at the bottom of the screen.
 Press the "Mode" button again to scroll
through settings for "Cool" (cooling only),
"Heat" (heating only) or "Heat Cool"
(Auto).
45