Cable Tuner Setup; Disconnecting The Cable Tuner - Sony Vajo VGC-LT20 Series User Manual

AMD~
Cable Tuner Setup
Cable Tuner Connection 5
Setting up your ATI TV Wonder™ Digital Cable Tuner on your PC is as
simple as plugging in cables. You will need to contact a cable service
provider to obtain a CableCARDTM before activating Premium Digital
Cable within Windows Media Center™ in Windows Vista™.
Note: The installation and activation of a CableCARDTM typically
requires an on-site visit from a licensed technician.
Cable Tuner Connection
1
Connect the ATI TV Wonder™ Digital Cable Tuner to its stand.
2
On the back of the ATI TV Wonder™ Digital Cable Tuner, connect
the AC adapter.
3
Plug the AC adapter into an electrical outlet.
4
With your computer powered off, connect the supplied USB cable to
the ATI TV Wonder™ Digital Cable Tuner.
5
Connect the opposite end of the USB cable to an available USB 2.0
port on your computer.
6
Tum on your system.
7
Your Windows Vista™ system should automatically notify you that it
has found the device and will automatically activate the appropriate
drivers.
Disconnecting the Cable Tuner
1
Power down your computer system (PC).
2
Disconnect the USB cable from the back of your PC, and then from
the ATI TV Wonder™ Digital Cable Tuner.
3
Unplug the AC adapter from its electrical outlet, and then from the
ATI TV Wonder™ Digital Cable Tuner.