Sony Vajo VGC-LT20 Series User Manual page 124

~124~
~
f
0
Upgrading Your VAIO Computer
8 Place a new drive into the drive holder and align the holes on each side of the drive bay.
9 Secure the drive to the drive holder with screws, through the holes on each side of the drive holder.
!
A new hard disk drive comes with the necessary screws. Do not overtighten these screws when securing the drive to the drive holder.
10 Slide the drive holder into the hard disk bay until it clicks into place and secure it with the screws.
!
Be sure to connect the Serial ATA power cable and the Serial ATA cable.