TUNABLE RUDDER
The Tunable Rudder is designed to offer easy adjustment of steering. This
system utilizes a composite tuning foil which is located at the upper aft
corner of the rudder blade. To adjust the foil a Phillips head screwdriver will
be needed. Loosen the two machine screws located in the relief slots of the
tuning foil.
Loosening Tuning Foil
If the boat is pulling left, rotate the foil to the left and tighten screws.
If boat is pulling to right, rotate the foil to the right and tighten screws.
Always remember that movement of the trailing edge of the foil to one side
will cause the steering to pull to the opposite side.
Note: After each adjustment, test run and adjust again if necessary.
Adjusting Tuning Foil left or right
5.11