Declaration Of Conformity - eXact PipeCut 360 system Operating Instructions Manual

Declaration of Conformity

We declare under our sole responsibility that the products described under "Technical Data"
are in conformity with the following standards or standardization documents: EN60745
according to the provisions of the directives 2004/108/EC, 2006/42/EC.
For more information, please contact Exact Tools at the following address.
The technical file is available at the address underneath.
Helsinki, 1.1.2010
Seppo Makkonen, Managing director
Exact Tools Oy
Särkiniementie 5 D
FI-00210 Helsinki
Finland
4